|
|
 
Unloader Gripper Unit (For 20 ltr to 2000 ltr Machine)
Drop Test Unit
Post Cooler & Post Cooler With Drilling Station
Hydrostatic Test Unit
Leak Test Unit Combination With Drilling Station
Socketing Machine
Hopper Loader
Modification In Blow Moulding Mould (210 ltr) (Top seal, 70mm Bungs House, Spacer for 235, 250 ltr)
Blow Pin Table
All Type of Blow Moulding Realated Work
Printing Machine    
 
UNLOADER GRIPPER (for 20 Ltr. to 2000 Ltr. Machine)
Mode: UN-S-B-L
US- Unloader Gripper
Cylinder Strock
Cylinder Bore
Machine Capacity in Ltr.
 
POST COOLER & POST COOLER WITH
DRILLING STATION (for 60 Ltr. to 250 Ltr. Barrels)
DRILLING STATION
(for 210 Ltr. to 250 Ltr.)
Model : PC- L-S-1-D
PC-Post Cooler
L- 210 Ltr.
S- Cylinder Strock
1/2/3/- Single / Two / Three Station
D-Drilling Station
 
3 STATION POST COOLER
Technical Specification of Single Station
1. Size: W1000 x L1000x H1430 mm hight.
2. Pneumatic cylinder : 150mm bore x 300mm strock.
3. Blower : Vaccume and Compressor type/Rotor Type Centrifugal Blower.
4. Can be use compressed air or Blower Air for Cooling the Barrels.
5. Top and Bottom Plates : Water Cooled.
6. Barrel Top and Bottom ring Cooling by Blower Air.
7. Timer for Cooling time and Auto Cut-Off.
 
LEAK TEST UNIT COMBINATION WITH DRILLING STATION (for 210Ltr. to 250 Ltr.)
CIRCULAR SAW (DRUM CUTTER)
WITH DUST COLLECTOR
Model : LT-D-L
LT- Leak Test Unit
D- Drilling Station
L- Barrel Capacity in Ltr.
Technical Specification
1. Size- W1000 x L1000 x H1300mm Hight.
2. Pneumatic Cylinder- 150mm Bore x 300mm Strock Double Ended.
3. Press. Teansducer - 0 to 200 Mbar.
Technical Specification
1. Size-W800 x L1000
2. 3HP motor
3. Cutting Dust
  Collecting Arrangement
 
HOPPER LOADER (for 20 Ltr. to 1000 Ltr.)
No. Description
HL - Hopper Loader
S/V - Spiral Flow / Vaccume Type
SL - Spring Length
M - Electric Motor H.P.
H - High Level Sensor
L - Low Level Sensor
SB - Storage Bin Capacity in kg.
SPIRAL FLOW HOPPER LOADER
Reliable method of materials tranfer, Widely used to handle all kinds of powder, granules, pellets and flake materials.
No. Description
1.
Storage Bin
2.
Horizontal lnlet
3.
HDPE Outer Tube
4.
Flexible Spiral Spring
5.
High Level Control
6.
Low Level Control
7.
Feeding Hopper
8.
Electric Motor
 
VERTICAL MIXTURE (Available with M.S. and S.S. Material)
VERTICAL MIXTURE 500 KG. CAPACITY
Model : VM-M.S.-500-3-SB
Main Motor - 3 HP
Batch Capacity - 500kg
Vessel Capacity - 550kg.
Batch Time - 10 min. to 15 min.
Floor Space - W 1.2 x L 1.2 x H 2.34 mts.
MODEL :
VM.
M.S./S.S.
100/250/500/1000/2000
2/3/5
SB
A
B
C
D
E
    A - Vertical Mixture
    B - Type of Vessel Material
    C - Mixing Capacity in kg.
    D - Motor Power Consumption 2 HP/3 HP/5 HP
    E - Storage Bin for Mix Material
VERTICAL MIXTURE WITH DRYER (Available with M.S. and S.S. Material)
MODEL :
VM.
M.S./S.S.
100/250/500/1000/2000
2/3/5
SB
D
A
B
C
D
E
F
  A - Vertical Mixture
B - Type of Vessel Material
C - Mixing Capacity in kg.
D - Motor Power Consumption 2 HP/3 HP/5 HP
E - Storage Bin for Mix Material
F - With Dryer
• While sending your enquiry for quotation pl. mention the dimension (L) and (H) in meters.
 
PRINTING MACHINE FOR BARRELS AUTOMATIC P.V.C. MOULDED FITTINGS RING GROOVING (SOCKETING) MACHINE
PRINTING MACHINE MANUALLY 210ltr. to 250 ltr.
PRINTING MACHINE 60 ltr.
PRINTING MACHINE SEMI AUTO 210 ltr. to 250 ltr.
Technical Specification
• Machine Dimensions :
1400mm x 750mm x 1000Height.
• Fittings Size Capacity :
50mm to 110mm
• Fittings wall thickness :
1 mm to 5mm.
• Fittings Types : All standard sizes
and types as per IS 14735: 1999
• Maximum Electrical Load :
24 Kw. Three phase 440V AC. 50Hz.
• Compressed Air : 8 - 10kg/cm2
 
Note: Due to constant process of design improvement, dimensions and specification may change without prior notice.
 
|
|
|
|
R.R. ENGINEERING WORKS
Tirupati Industrial Estate, Gala No.3, Survey No.113/2/1, Amli, Silvassa - 396230 (D.&N.H.) India.
Cell : +91-9662011953, 9328611954, Email : info@rrengineering.in, rnetke@yahoo.com
Created And Hosted By Softweb Technology